Wide Tire Rear Fender Kit for Softaii® Models by Corbin
Bolts to stock frame but has plenty of room to accept tires as wide as 180-series. Includes a replica of a '39 Ford taillight assembly and all mounting hardware. Black gel-coat finish is ready to paint. (saddlebags not included).

Molded Saddlebags for Softail® Models
Designed by Corbin and made of light, strong 'Fiber Tek' material. Each set includes right and left bags complete with doors, locks, and all mounting hardware. Black gel-coat finish is ready to paint.

Doss 'Lowboy' Rear Fender Kit for Softail Models
Gives your bike a low, wide look in a shorter length than popular tail-dragger fender (CCI #13-266). It has molded recesses for a 'Cateye' taillight and die-cast license plate bracket are included in the kit. It's made from hand-laid fiberglass with black gel-coat finish that's ready for custom paint, and is without pre-drilled mounting holes permitting a custom fit to each bike.

Doss Fiberglass Rear Fender for Softail Models
Manufactured with hand-laid fiberglass and finished in a black gel-coat that's ready for painting. Looks great when teamed up with its matching front fender (CCI #13-265) that fits Heritage Softail® and Fat Boy® models. The two recessed areas will accept a Cateye taillight and most standard license plates that measure 7"-wide x 4"-tall. It comes unpainted and requires mounting holes to be drilled.

Phantom Rear Body Kit for Softail® Models by Pro-One
Step away from ordinary with the distinctive Phantom rear body kit that sets a new standard for custom Softall® bikes. Contemporary Euro look unit comes complete with mounting hardware and a seat base ready for custom upholstery. Available with or without polished Pro-One billet taillight.

Replacement Rear Fenders for Softail® Models
An exact duplicate of the Original Equipment fender fitted to Heritage Softail® models. Features turn signal mounting holes already located and includes the taillight mount and fender reveal. It's ready to use as an Original Equipment replacement item or for FXSTS converting to full one-piece fenders. Also available in a smooth version with only fender strut holes in it when custom taillights are desired.

Rear Fender Extension for Softail® Models
Improves the overall appearance of this area on the bike. It is made in the U.S.A. from black, paintable high-impact A.B.S. plastic, and when painted to match the fender and properly installed, this fender extension gives the appearance of the fuller and rounder long fenders used on rigid framed Big Twins.

Custom Rear Fenders for Softail Models
These steel fenders are sold exclusively by Custom Chrome, and have an early-style 'reveal' stamped in the rear tips. Installation requires the removal of 5" from the struts. Two decorative end caps are supplied to finish off the shortened struts. Fit all 5-speed Softail® models from 1986 to present.

Hinged Rear Fenders for Softail® Models
'Dresser'-style rear fenders with hinges that fit the Original Equipment struts of all Softail® models from 1984 to present. One version is smooth with no taillight mount permitting the use of a variety of taillights and the other has the 1973-up mount. These fenders are a good choice when customizing your FXST with a 'Heritage Conversion Kit'.

Fat Bob Rear Fenders for FXWG and Softail® Models
Exact duplicates of the Original Equipment pieces. They have all of the wire loom clips and necessary strut mounting holes. Both fenders accept stock taillight assemblies as well as our custom 'Cateye' and 'Lucas' taillights and brackets which are listed below. CCI #13-206 is perfectly suited for crash repairs or converting from the full fenders on Heritage Softail models.

Dresser-Style Fenders for Dyna Wide Gilide® Models
Exclusive Custom Chrome® design combines a steel fender with an ABS front fend extension. Available in a smooth version without turn signal or taillight mounts, or with the mounting bracket for taillights used since 1973 with dimples and holes for turn signals an rear fender tip trim. Kits include fender, plastic extension and rivets.

Fat Bob Rear Fender Kit for FXR Models
Fits all FXR models from 1982 thru 1986 and 1987 thru 1992 FXRTS. The Fat Bob rear fender is combined with our smooth, chromed steel fender struts that not only improve styling but provide improved fender support over the Original Equipment parts. Uses CCI taillight kits with Fat Bob mounts, or the stock (OEM 59993-80) taillight bracket. This kit and its components are not compatible with Original Equipment or aftermarket sissy bars.

Flip Rear Fender Kit for FXR Models
Flip-up fender fits all FXR models from 1982 thru 1986, and 1987 thru 1992 FXRTS. It's combined with specially-designed chrome struts to smooth the styling and provide improved support. The fender and struts are sold as a kit and are not compatible with Original Equipment or aftermarket sissy bars.

One Piece Rear Fenders for FL Models
Accurate reproductions of the one-piece rear fenders on 4-speed FL models from 1980 thru 1984. One version on is smooth with no taillight or turn signal mounts permitting the use of a variety of taillights, and the other has the 1973-up taillight mount (but no turn signal mounts). Fender strut mounting holes are already drilled.

Sport Bob Rear Fender Kits for Sportster Models
These exclusive fender kits include a new ABS plastic fender extension for the front of the fender, a Cateye taillight assembly with mounting bracket and the extra pop rivets necessary to reinstall your circuit breaker clips. They looks great when combined with the CCI #25-576 one-piece Sport Bob gas tanks found in the Gas Tanks section.

C.C. Glider™ Slipover Fender Shell for Sportster® Models
Easy to install fender cover is made from high-quality impact resistant A.B.S. plastic, these fender shells slip over the existing stock metal fenders like a second skin, giving all 1982-up Sportster® models that classic full-fender big bike look. Just paint it to match, remove your taillight, seat and fender struts, slip into place and reassemble. When combined with our Sport Bob one-piece gas tank (CCI #25-576) and a skirted front fender (CCI #13-196), your bike can be transformed into a whole new machine.

Rear Fenders for Early Sportster® Models
Steel rear fenders with stock mounting holes in the sides for Sportster® models from 1959 thru 1978. Available with or without taillight hole. We also have a shortened 'Bobbed' fender. Both styles look very good with either CCI #19-644 'Tombstone' or CCI #26-357 'Beehive' style taillights.